Ключевые слова: MgB2, phase diagram, bulk, wires, joints, interfaces, in-situ process, fabrication
Ключевые слова: rotating machines, motors, HTS, YBCO, coated conductors, stacked blocks, multilayered structures, ferromagnetic coating, magnetization, stacked blocks, modeling, critical caracteristics, critical current density, magnetic field dependence, temperature dependence, flux density, distribution, numerical analysis, experimental results
Ключевые слова: rotating machines, trapped field magnets, HTS, YBCO, coated conductors, coils, flux density, distribution, design, design parameters, losses, demagnetization, modeling, numerical analysis
Ключевые слова: HTS, coated conductors, stacked blocks, demagnetization, frequency dependence, shielding effects, current density, induction, cycling, modeling, numerical analysis
Ключевые слова: HTS, GdBCO, tapes, stacked blocks, substrate Ni-W, architecture, trapped field, flux density, distribution, magnetization, experimental results, numerical analysis
Glowacki B.A., Glowacki B.A., Tomkow L., Tomkow L., Mineev N., Mineev N., Smara A., Smara A., Climente-Alarcon V., Climente-Alarcon V.
Ключевые слова: rotating machines, motors, measurement setup, cryogenic systems, cryostat, hydrogen liquid, design, test results
Ключевые слова: HTS, tapes, stacked blocks, trapped field, angular dependence, magnetic field dependence, modeling, numerical analysis
Ключевые слова: rotating machines, motors, aviation application, propulsion system, HTS, ac losses, stators, rotors, design, review, Bi2223, MgB2, REBCO, coils, flux density, distribution
Ключевые слова: fabrication, PIT process, LTS, Nb3Sn, MgB2, HTS, Bi2212, cryogenic systems, hydrogen liquid, microstructure, critical caracteristics, critical current, flux density, Jc/B curves, experimental results
Ключевые слова: MgB2, wires, cables, twisting, cooling technology, sintering, helium gas, heat treatment, comparison, critical caracteristics, critical current, fabrication, experimental results
Ключевые слова: presentation, HTS, REBCO, YBCO, coated conductors, stacked blocks, flux density, width, trapped field distribution, magnetization, demagnetization, trapped field magnets, wind farms application, generators, aviation application, hydrogen liquid, fuel, pulsed magnetization, shields, rotating machines, rotors, ac losses, ferromagnetic coating
Ключевые слова: presentation, rotating machines, motors, heterostructures, HTS, coated conductors, magnetization, magnetic field distribution
Ключевые слова: rotating machines, rotors, stators, magnetization, HTS, torque, numerical analysis, modeling, motors, design, design parameters, flux density, distribution, current density
Glowacki B.A., Nijhuis A., Kutukcu M.N., Atamert S., Scandella J., Hopstock R., Blackwood A.C., Dhulst C., Mestdagh J.
Hanisch J., Glowacki B.A., Patel A., Baskys A., Lao M., Mitchell-Williams T., McCaul A., Coniglio W.
Ключевые слова: HTS, coated conductors, stacked blocks, pulsed magnetization, modeling, numerical analysis, trapped field magnets
Gomory F., Glowacki B.A., Frolek L., Hopkins S.C., MOLODYK A., Guo Y., Petrykin V., Baskys A., Mitchell-Williams T.B., Bangert U.
Glowacki B.A., Hopkins S.C., MOLODYK A., Giunchi G., Patel A., Albisetti A.F., Baskys A., Kalitka V.
Ключевые слова: levitation performance, bearing magnetic, HTS, REBCO, coated conductors, stacked blocks, MgB2, bulk, disks, design parameters, experimental results
Ключевые слова: HTS, YGdBCO, coated conductors, stacked blocks, trapped field, modeling, critical caracteristics, critical current, n-value, angular dependence, flux density
Gomory F., Glowacki B.A., Granados X., Puig T., Obradors X., Usoskin A., Hopkins S.C., Vojenciak M., Driessche I.V., Backer M., Vlad V.R., Vilardell M., Soloviov M., Calleja A., Mitchell-Williams T.B., Bussche D.R.
Ключевые слова: HTS, YBCO, coated conductors multifilamentary, fabrication, inkjet printing, ac losses
Ключевые слова: MgB2/Cu, wires, in-situ process, doping effect, densification, heat treatment, annealing process, critical caracteristics, Jc/B curves, fabrication
Ключевые слова: hydrogen, fabrication, hydrogen liquid, flux density, temperature dependence, MgB2, HTS, YBCO, LTS, NbTi, Nb3Sn, cooling technology, cryogenic systems, renewable energy systems, review
Glowacki B.A., Hopkins S.C., MOLODYK A., Giunchi G., Patel A., Albisetti A.F., Baskys A., Kalitka V.
Ключевые слова: HTS, GdBCO, coated conductors, stacked blocks, levitation performance, magnets permanent, cylinders, trapped field, MgB2, bulk, disks, bearing magnetic
Ключевые слова: HTS, stacked blocks, REBCO, coated conductors, coils pancake, cylinders, bulk, levitation performance, displacements, critical state model
Glowacki B.A., Granados X., Puig T., Obradors X., Usoskin A., Hopkins S.C., Ricart S., Falter M., Backer M., Vlad V.R., Vilardell M., Calleja A., Joseph D., Mitchell-Williams T.B.
Ключевые слова: HTS, YBCO, coated conductors, tapes multifilamentary, inkjet printing, fabrication, ac losses
Ключевые слова: MgB2/Cu, fabrication, densification, joints, pulsed operation, magnetic field dependence, microstructure, MRI magnets
Ключевые слова: HTS, coated conductors, stacked blocks, pulsed magnetization, trapped field, YBCO, bulk, comparison, temperature dependence, trapped field distribution
Glowacki B.A., Hopkins S.C., Cardwell D.A., Giunchi G., Patel A., Palka R., Albisetti A.F., Shi Y.*32
Ключевые слова: MgB2, cylinders, pulsed magnetization, HTS, bulk, REBCO, levitation performance, trapped field distribution, cycling, stiffness, experimental results
Glowacki B.A., Minervini J.V., Jiang X., Zeng R., Bromberg L., Wozniak M., Cheadle M.J., Brisson J.G.
Ключевые слова: MgB2, wires, comparison, twisting, cables, dc performance, cryogenic systems, helium, cryostat, HTS, current leads, joints, critical caracteristics, critical current, temperature dependence, stability, experimental results
Holzapfel B., Glowacki B.A., Granados X., Hopkins S.C., Ricart S., Driessche I.V., Backer M., Feys J., Lommens P., Vilardell M., Kirchner A.
Glowacki B.A., Hopkins S.C., Falter M., Backer M., Patel A., Van Driessche I., M.Mosiadz, Juda K.L., Vandaele K., Soloducho J.
Ключевые слова: HTS, coated conductors, YBCO, IBAD process, measurement setup, critical caracteristics, critical current, angular dependence, experimental results, width
Glowacki B.A., Hopkins S.C., Shi Y., Cardwell D.A., Giunchi G., Patel A., Palka R., Figini Albisetti A.
Ключевые слова: levitation performance, bearing magnetic, design, HTS, YBCO, bulk, rotors, stators, pulsed magnetization, MgB2, cylinders, REBCO, trapped field magnets, fabrication
Ключевые слова: bearing magnetic, HTS, YBCO, bulk, MgB2, cylinders, irreversibility fields, pulsed magnetization, current density, distribution, modeling, design, new
Glowacki B.A., Kozak J., Janowski T., Kozak S., Kondratowicz-Kucewicz B., Wojtasiewicz G., Majka M., Wozniak M.
Holzapfel B., Schultz L., Glowacki B.A., Hopkins S.C., HaBler W., Nenkov K., Rodig C., Schubert M., Morawski A., Herrmann M., Kario A.
Ключевые слова: coated conductors, substrate Ni-W, buffer layers, inkjet printing, fabrication
Ключевые слова: presentation, HTS, YBCO, coated conductors, cap layers, inkjet printing, fabrication, microstructure
Ключевые слова: LTS, Nb3Sn, internal tin method, fabrication, wires multifilamentary, microstructure, phase formation
Ключевые слова: MgB2, wires, coils, fusion magnets, LTS, Nb3Sn, comparison, hydrogen, helium, irradiation effects, NbTi, Jc/B curves, experimental results, power equipment, critical caracteristics, high field magnets
Ключевые слова: FCL inductive, numerical analysis, mechanical properties, HTS, bulk, tubes, Bi2223, temperature distribution, power equipment
Glowacki B.A.(bag10@cam.ac.uk), Majoros M., Kitaguchi H., Kumakura H., Okada M., Tanaka K., Yamada H., Hirakawa M*4., Hancock M.H., Bay N.
Ключевые слова: HTS, REBCO, films, texture, chemical solution deposition, single crystals, substrate SrTiO3, microstructure, fabrication, dip coating technique
Glowacki B.A., Kozak J., Janowski T., Kozak S., Surdacki P., Kondratowicz-Kucewicz B., Wojtasiewicz G.
Ключевые слова: SMES, HTS, coils pancake, Bi2223, cryocoolers, design parameters, modeling, numerical analysis, power equipment
Ключевые слова: HTS, phase formation, Jc/B curves, bulk, fabrication, sintering, critical caracteristics
Glowacki B.A., Tan K.S.(kst26@cam.ac.uk), Dou S.X., Horvat J., Yeoh W.K., Soltanian S., Chen S.K.
Ключевые слова: MgB2/Fe, nanodoping, MgB2/Fe, MgB2/Fe, carbon nanotubes, wires monofilamentary, heat treatment, Jc/B curves, fabrication, critical caracteristics
Majoros M., Glowacki B.A., Campbell A.M., Barnes P.N., Levin G.A., Polak M.(milan.polak@savba.sk)
Ключевые слова: HTS, YBCO, coated conductors multifilamentary, ac losses, RABITS process, bridges, experimental results, fabrication, striations
Majoros M., Glowacki B.A., Tan K.S.(kst26@cam.ac.uk), Hopkins S.C., Astill D.
Ключевые слова: LTS, Nb3Sn, wires multifilamentary, bronze process, fabrication, resistance, experimental results, magnetic properties
Kursumovic A., Glowacki B.A., Evetts J.E., Tomov R., MacManus-Driscoll J.L., Bugoslavsky Y., Qi X.(xq204@cam.ac.uk), Lockman Z.
Ключевые слова: HTS, YBCO, coated conductors, substrate Ni, LPE process, fabrication, microstructure
Glowacki B.A., Tan K.S.(kst26@cam.ac.uk), Hopkins S.C.
Ключевые слова: LTS, Nb3Sn, wires multifilamentary, bronze process, fabrication, resistance, heat treatment, experimental results
Glowacki B.A.(bag10@cam.ac.uk), Majoros M., Vickers M., Eisterer M., Toenies S., Weber H.W., Fukutomi M., Komori K., Togano K.
Majoros M., Weber H.W., Tomov R.I.(rit21@cam.ac.uk), Kursumovic A., Glowacki B.A., Evetts J.E., Tuissi A., Villa E., Zamboni M., Sun Y., Tonies S.
Holzapfel B., Glowacki B.A., Tuissi A., Villa E., Kursumovic A.(ak237@cus.cam.ac.uk), Tomov R., Huhne R., Everts J.E.
Ключевые слова: HTS, YBCO, coated conductors, substrate Ni, microstructure, fabrication, magnetic properties
Ключевые слова: coated conductors, substrate Ni-Cr, fabrication, microstructure, magnetic properties
Glowacki B.A.(bag10@cam.ac.uk), Majoros M., Eisterer M., Toenies S., Weber H.W., Fukutomi M., Komori K., Togano K.
Ключевые слова: MgB2/Cu, PIT process, coated conductors, Bi2212, substrate Hastelloy, substrate Ag, Jc/B curves, pinning force, review, HTS, critical caracteristics, fabrication, magnetic properties
Majoros M., Glowacki B.A., Tomov R.I., Campbell A.M., Oberly C.E.(charles.oberly@wpafb.af.mil)
Weber H.W., Kursumovic A., Glowacki B.A., Evetts J.E., Tuissi A., Villa E., Tonies S., Tomov R.I., Vostner A.(alexander.vostner@tech.efda.org), Sun Y.F.
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.